BRQPB - MIL-P-REACTOR P/N 5806

  • MSDS: BRQPB
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: MIL-P-REACTOR P/N 5806
  • National Stock Number: 8010-00-410-8461
Product Identification

Product ID:MIL-P-REACTOR P/N 5806
MSDS Date:02/24/1993
FSC:8010
NIIN:00-410-8461
Kit Part:Y
MSDS Number: BRQPB

Responsible Party
INTERNATIONAL PAINT CO INC
6001 ANTOINE
HOUSTON, TX 77292
US

Emergency Phone: 713-682-1711

Info Phone: 713-682-1711 / FAX 713-682-0065

Cage: 69827

Contractor
INTERNATIONAL PAINT INC. INTERNATIONAL
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 69827

Ingredients

AROMATIC PETROLEUM SOLVENT (SLVT NAPHTHA, [PET] LT AROM)

CAS: 64742-95-6

Fraction By Weight: 15-20%

OSHA PEL 100.00 PPM

ACGIH TLV: 100.00 PPM


EPOXY RESIN

CAS: 25068-38-6

Fraction By Weight: 50-55%


POLYAMIDE

Fraction By Weight: 1-5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CUASE IRRITATION WITH
REDNESS, TEARING AND BLURRED VISION. SKIN: IRRITATING. MAY RESULT
IN DERMATITIS. MAY CAUSE SENSITIZATION OR OTHER ALLERGIC RESPONSES.
INHALATION: MAY CAUSE IRRITATION. INGESTION: MAY CAUSE
GASTRO-INTESTINGALIRRITATION.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN: REMOVE
CONTAMINATED CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND WATER.
LAUNDER CLOTHES BEFORE REUSE. INHALATION: REMOVE TO FRESH AIR.
GIVE ARTIFICIAL RESPIRATION IF NEEDED. GET MEDIDAL ATTENTION.
INGESTION: CALL A PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
TO INDUCE VOMITING.

Fire Fighting

Flash Point:115F,46C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES W/ABOVE EXTINGUISHING MEDIA.
USE WATER TO COOL UNOPENED CONTAINER, DON'T USE AS EXTINGUISHING
MEDIA. PREVENT SPREAD OF BURNING LIQUID WITH WATER.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARKS OR OPEN FLAME ARE PRESENT. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREAS. CLEAN UP WITH ABSORBENT
MATERIALS.

Handling

Handling and Storage Precautions:STORE IN BLDGS DESIGNED & PROTECTED
FOR STORAGE OF LIQUIDS WITH NFPA CLASS II. AVOID BREATHING DUST OR
CHIPS FROM SANDING OR BLASTING COATED SURFACES.
Other Precautions:CHRONIC OVEREXPOSURE TO AND MISUSE OF SOLVENTS HAS
BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.

Exposure Controls

Respiratory Protection:IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT, USE
NIOSH FILTER RESPIRATOR TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED VENT, USE NIOSH
RESPIRATOR IN ACCORD W/29CFR19 10.134 TO REMOVE PARTIC/VAPOR
COMBINATN.
Ventilation:VENT TO KEEP BELOW TLV/LEL AND TO REMOVE DECOMPOSITION
PRODUCTS DURING WELDING OR FLAME CUTTING COATED SURFACES.
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY GLASSES, CHEM GOGGLES, FACESHIELD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:344F,173C
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:20

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARKS.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, ALDEHYDES
Conditions to Avoid Polymerization:STORE AWAY FROM DIRECT HEAT, FLAME
OR SPARKS.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CNTNRS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.